128 – ScanningCX2731 MFP Basic User’s Guide3 Press the down arrow key repetitively to scroll to [LocalPC], thenpress the right arrow key.4 Press the down arrow key repetitively to scroll to [Select aconnecting PC], then press the right arrow key.5 Press the down arrow key repetitively to scroll to [FromNetwork], then press the right arrow key.6 Press the down arrow key repetitively to scroll to the computeryou want, then press the right arrow key.7 Press the down arrow key repetitively to scroll to [Select anapplication], then press the right arrow key.8 Press the down arrow key repetitively to scroll to where to sendthe scanned document, then press .9 Press or to initiate the scan.Note• If you select [Application], the specified application starts andthe scanned image appears on the application.• If you select [Folder], the scanned image is saved in thespecified folder.• If you select [PC-FAX], the application for fax transmissionstarts.After sending the scanned image, send a fax with the faxtransmission software on your computer.Scan to Remote PCThis function launches the TWAIN driver from a utility installed on aPC (ActKey, PaperPort, etc.) and starts scanning. The machine can beconnected to a computer via USB interface or to a network.There are two modes; simple scan mode and secure scan mode. Insimple mode you can start a scan job easily. In secure scan mode,only the operation from the specified computer can be done.The instructions below use ActKey as an example.
