84 – FaxingCX2731 MFP Basic User’s Guide6 Press to start the transmission.When you want to scan multiple documents as a single fax jobusing the document glass, enable the continuous scan mode. Fordetails on the continuous scan mode, see page 76.Note• When you want to specify multiple destinations, refer to theAdvanced User’s Guide at www.my.okidata.com.• For details on how to configure each fax function, see page 89.Specifying a DestinationYou can specify a destination in the following ways:• Using the keypad (see below)• Using speed dial (see page 86)• Using a group list (see page 86)• Using the transmission histories• Using the reception histories• Using the One-Touch keypadPerform the following procedures at step 5 of “Sending a Fax”described above.Direct Input: Using the KeypadYou can enter up to 40 digits using the keypad.1 Make sure that [Add destination] is selected on the fax standbyscreen, then press .2 Press the down arrow key repetitively to scroll down to [DirectInput], then press .
