Oki CX3535MFP Material Safety Data Sheet

Also see for CX3535MFP: Safety information Manual Safety information Operator's manual Fax guide

Contents

Oki CX3535MFP Material Safety Data Sheet Manual pdf 1 page image

1 – EnglishMaterial Safety Data Sheet# 58409401Black Toner, Type D2: P/N 44947308For more information, contact Oki Data at: 2000Bishops Gate Boulevard, Mount Laurel, NJ 08054-4620.Emergency Information: call 1-800-654-3282; US andCanada only.COMPOSITION/INFORMATION ONINGREDIENTSINGREDIENT(S) CAS No. wt.%Polyester resin - - - 80-90Carbon black 1333-86-4 3-8Wax - - - <10Amorphous Silica 7631-86-9 <5Titanium dioxide 13463-67-7 <2- - - TRADE SECRETHAZARDS IDENTIFICATIONEmergency Overview: If used as intended, the product doesnot present acute or chronic health hazard.Physical Hazards: This product is not classified asflammable or combustible. It will burn in case of fire. Avoidcontact with strong oxidizers such as chromate, bromate andnitrates.Routes of Exposure: Inhalation, dermal contact, incidentalingestionInhalation: Excessive inhalation may cause irritation of thenose, throat and respiratory tract.Eye Contact: Non-irritant.Dermal Contact: Non-irritant, non-sensitiser.Ingestion: Not currently known.Chronic Effects: See Section 11 Supplemental HealthInformation.Carcinogenicity: See Section 11 Supplemental HealthInformation.Reproductive/Developmental: Not identified.Target Organs: Prolonged breathing of high concentrationsmay cause adverse effects on the respiratory system.Signs and Symptoms of Exposure: Prolonged exposure todusts of this product may irritate the respiratory system.Medical Conditions Aggravated by Exposure to ThisProduct: Respiratory disorders, such as asthma, may beaggravated by prolonged exposure to high concentrations ofthis product.FIRST AID MEASURESEye Contact: Immediately flush eyes with plenty of water forat least 15 minutes. If irritation persists, call a physician.Skin Contact: Wash with soap and water. Wash clothingbefore reuse. If irritation occurs or is persistent, seek medicalattention.Ingestion: Dilute stomach contents with several glasses ofwater.Inhalation: Remove from exposure area to fresh airimmediately. Contact a physician if there is any difficulty inbreathing or other signs of distress.FIRE FIGHTING MEASURESGeneral Hazard: Product will burn in case of fire.Flash Point: Not applicableFlammable Limits: Not applicableAutoignition Temperature: Not applicableFlammability classification: Not applicableExtinguishing Media: Foam, halon, carbon dioxide, drychemical & water fog.Unusual Fire & Explosion Hazard: Combustible powder.Dust of this product at sufficient concentrations can formexplosive mixtures with air.Fire Fighting Procedures: NoneHazardous Combustion Products: Carbon monoxide,carbon dioxide and smoke.ACCIDENTAL RELEASE MEASURESSpills or Leaks: Vacuum-clean spilled toner and carefullytransfer into sealable waste container. If no vacuum-cleaneris available, sweep slowly to minimize generation of dustduring clean-up. Residue can be removed with soap and coldwater.HANDLING AND STORAGEHandling: Avoid dust, keep away from ignition sources.Prevention of Fire and Explosion: This material is capableof creating a dust explosion. Keep away from heat, sparks &flame.Storage: Keep container in cool and dry area.Hygienic Practices: Avoid inhalation and ingestion. Avoidgetting in eyes, on skin or clothing. Wash hands thoroughlyafter handling, and before eating, drinking, or smoking.EXPOSURE CONTROLS/PERSONALPROTECTIONExposure LimitsOSHA PELs (TWA)as the product: 15mg/m3 (Total dust) 5mg/m3 (Respirablefraction)Carbon black: 3.5 mg/m3Other substances: Not listedACGIH TLVs (TWA)as the product: 10mg/m3 (Total dust) 3mg/m3 (Respirablefraction)Carbon black: 3.5 mg/m3Other substances: Not listedDFG-MAK (TWA)as the product: 4mg/m3 (Inhalable fraction) 1.5mg/m3(Respirable fraction)All substances: Not listedNOHSC (TWA)All substances: Not listedEngineering Controls: Maintain adequate ventilation.Eye Protection: Not required under intended use.Skin Protection: Not required under intended use.Respiratory Protection: Not required under intended use.PHYSICAL AND CHEMICAL PROPERTIESAppearance: Fine solid powderColor: BlackScent: OdorlessMelting Point: 110 - 150 degree (Softening point)Specific Gravity(H2O=1): 1.1 - 1.5Vapor Pressure: Not applicableVapor Density (Air=1): Not applicableEvaporation Rate: Not applicableSolubility in Water: NegligiblepH Value: Not a water-based product, therefore notapplicable.Explosive Properties: little possiblity in intended use.According to Explosive Evaluation, can form explosive dust-airmixtures when finely dispersed in air, like most finely grainedorganic powders.STABILITY AND REACTIVITYStability: StableIncompatibility: Not identified.Hazardous Decomposition Products: Carbon monoxideand carbon dioxide.Hazardous Polymerization: Will not occur.