Oki CX3641MFP Technical Reference

Also see for CX3641 MFP: Configuration guide Module guide Handy reference Technical reference Technical user guide

Oki CX3641MFP Technical Reference Manual pdf 16 page image

S ETTING UP P RINTING CONNECTIONS 16SETTING U P PRINTING C ONNECTIONSTo print from Windows computers, you or your administrator must perform thefollowing tasks if you want to set up a connection other than port 9100:• Set up network servers, if any.• Set up the CX3641MFP to accept print jobs from your computer.• Configure a port on each Windows computer for the network type.Printing connectionsThe CX3641MFP supports the following printing connections:• SMB• Standard TCP/IP (RAW or LPR)• IPP or IPP over SSL• Print using the Mail PortN OTE : For more information about the Mail Port, see “Printing using Mail Port” onpage 33.Completing the SMB printing connectionIf your network does not have a Windows server, Windows computers can still print to theCX3641MFP. This method of printing is SMB printing (also known as Windows or WINSprinting). When users send print jobs, computers running Windows operate in apeer-to-peer environment and communicate directly with the CX3641MFP.Enabling SMB printing allows the CX3641MFP to be listed on the network. This allowsWindows clients to print to a particular print connection (Print queue, Hold queue, orDirect connection) on the CX3641MFP without using other networking software.Windows printing runs via TCP/IP. You must configure TCP/IP on the CX3641MFP andon all computers that use SMB printing.After you enable SMB printing on the CX3641MFP, you can set up the Windows or SMBconnection and install the printer driver in one procedure. For more information, see“Installing printer drivers by Point and Print” on page 8.