Oki CX3641MFP User Manual

Also see for CX3641 MFP: Configuration guide Module guide Handy reference Technical reference Technical user guide

Oki CX3641MFP User Manual Manual pdf 23 page image

Paper recommendations > 23TRAYS AND STACKERSTRAYS 1 TO 4Tray 1 is the standard blank paper input tray and can hold up to 530 sheets of 80g/m²paper. Trays 2 to 4 result in a total tray capacity of 2120 sheets of 80g/m² paper.If you have identical paper stock loaded in another tray (for example Tray 2 or the MPTray), you can have the printer automatically switch to that other tray when the currenttray runs out of paper. This function can be enabled by driver settings when printing froma Windows application or by a menu setting when printing from other applications.MP TRAYThe multi-purpose tray is used for media sizes additional to those of the standard trays,heavier media weights and special media.The multi-purpose tray can handle the same sizes as the standard trays but in weights upto 300g/m². For very heavy paper stock use the face-up paper stacker. This ensures thatthe paper path through the printer is almost straight.The multi-purpose tray can hold up to 230 sheets of 80g/m² standard paper or 50 sheetsof 300g/m².The multi-purpose tray can feed paper widths as small as 76.2mm and lengths up to1200mm. For banner printing, recommended sizes are listed on page 22.Use the multi-purpose tray for printing on envelopes and transparencies. Up to 100 sheetsof transparencies or 25 envelopes can be loaded at one time, subject to a maximumstacking depth of 25mm.Paper or transparencies should be loaded print side up and top edge into the printer. Donot use the duplex (two-sided printing) function for transparencies.FACE-DOWN STACKERThe face-down stacker on the top of the printer can hold up to 500 sheets of 80g/m²standard paper, and can handle paper stocks from 64 – 216g/m². Pages printed in readingorder (page 1 first) will be sorted in reading order (last page on top, facing down).FACE-UP STACKERThe face-up stacker should be opened and the tray extension pulled out when required foruse. (With the face-up stacker either open or closed, the driver setting of Face Down willsuccessfully direct prints to the Face-Down stacker.)The face-up stacker can hold up to 200 sheets of 80g/m² standard paper and can handlestocks up to 300g/m².Always use this stacker and the multi-purpose feeder for paper stocks heavier than216g/m².