ES 3037/3037e Setting up • 66Network menuOnly appears if the network card is installed.The default settings are bold.Item Value DescriptionTCP/IP Enable; Disable Selects TCP/IP protocol.NETWARE Enable; Disable Selects Netware protocol.ETHERTALK Enable; Disable Selects EtherTalk protocol.NETBEUI Enable; Disable Selects NetBEUI protocol.FRAME TYPE Auto; 802.2; 802.3Ether-II; SnapSelects Ethernet frame type.DHCP/BOOTP Enable; Disable Selects whether selection of DHCP/BOOP is automatic.RARP Enable; Disable Selects whether selection of RARP isautomatic.IP ADDRESS xxx.xxx.xxx.xxx Configures IP address of 12alphanumeric characters.SUBNET MASK xxx.xxx.xxx.xxx Configures subnet mask of 12alphanumeric characters.GATEWAYADDRESSxxx.xxx.xxx.xxx Configures gateway address of 12alphanumeric characters.PRINTSETTINGSON; OFF Selects printing of network menumap.INITIALIZE ON; OFF Selects network initialization.Memory menuThe default settings are bold.Item Value DescriptionRECEIVE BUFFSIZEAuto; OFF; 0.5 MB;1 MB; 2 MB; 4 MB; 8MB; 16 MB; 32 MBSets the size of the receive bufferand depends on the amount ofmemory installed in the printer.RESOURCESAVEAUTO; Off; 0.5 MB;1 MB; 2 MB; 4 MB; 8MB; 16 MB; 32 MBSet the size of the font cache areaand depends on the amount ofmemory installed in the printer.FLASHINITIALIZEExecute Initializes flash memory if installed.
