Oki ES9466 Manual

Oki ES9466 Manual Manual pdf 21 page image

Doing Paper Settings 21LOADING PAPER0.Doing Paper Settings Setting paper sizeThe paper size is automatically detected when the paper is loaded in a tray.If the displayed size differs from the actual one or if “ ” appears, the paper size is not correctly detected. Checkthe following points: Make sure that paper with an acceptable size is loaded in a tray.To learn about the acceptable paper sizes when you load paper in a tray, refer to the Specifications Guide. Make sure that paper with a standard size is loaded in a tray.Press [Custom] and set the paper size manually. P.22 “Setting paper with non-standard sizes” Make sure that the gaps between the paper and the side guide and the paper and the end guide are not too wide.Set the paper, side guide and end guide in the correct positions again. P.11 “Loading Paper in Trays” Make sure that [Auto (inch)] is not selected when A/B format paper is loaded. Make sure that [Auto (mm)] is notselected when LT format paper is loaded.Press the button according to the paper format and load paper again.If the displayed size differs from the actual one even if you load standard size paper, set the paper size manually. If youwant to change the size manually, the administrator needs to change the setting. For details, refer to the MFPManagement Guide.To automatically detect the size of paper placed in a tray:Press [Setting -User-] on the Home screen > [Tray] and select the desired tray on the displayed screen. Select [Auto(mm)] when A/B format paper is loaded and [Auto (inch)] when LT format paper is loaded. The paper sizes for alltrays are preset to [Auto (mm)] or [Auto (inch)] depending on your region. If you do not need to change the setting,you do not need to do this procedure.