140Manutenção diáriaUse o procedimento descrito a seguir depois de desligara impressora e remover a bateriaLimpeza da cabeça térmica➊ Deslize a alavanca deabrir/fechar a tampa eabra a tampaSe a impressora estiver sendousada no modo de dispensa,levante a alavanca de troca edeslize a unidade dispensadoraaté que pare (ver página 19)➋ Limpe a sujeirausando um panoporoso umedecidocom álcool* Nunca use tíner, benzenonem queroseneDaily Maintenance12Cleaning the platen and peel roller1 Slide the cover Open/Close lever and openthe Open cover.If you are using the printer inDispense mode, lifting thechange lever, slide thedispense unit until stops.2 Wipe off the dirt usingcloth wetted (soaked)in alcohol.* Never use thinner,benzene, or kerosene.PlatenDaily Maintenance123912. Daily MaintenanceUse the following procedure after turning the printer off andremoving the battery pack.Cleaning thermal head1 Slide the cover Open/Close lever and openthe Open cover.If you are using the printer inDispense mode, lifting thechange lever, slide thedispenser unit until stops(see Page 28).2 Wipe off the dirt usingcloth wetted (soaked)in alcohol.* Never use thinner,benzene, or kerosene.
