29Daily MaintenanceUse the following procedure after turning the printer offand removing the battery packCleaning thermal head➊ Slide the cover Open/Close lever and open theOpen coverIf you are using the printerin Dispense mode, lifting thechange lever, slide the dispenserunit until it stops (see page 19)➋ Wipe off the dirt usingcloth wetted (soaked)in alcohol* Never use thinner,benzene, or keroseneDaily Maintenance12Cleaning the platen and peel roller1 Slide the cover Open/Close lever and openthe Open cover.If you are using the printer inDispense mode, lifting thechange lever, slide thedispense unit until stops.2 Wipe off the dirt usingcloth wetted (soaked)in alcohol.* Never use thinner,benzene, or kerosene.PlatenDaily Maintenance123912. Daily MaintenanceUse the following procedure after turning the printer off andremoving the battery pack.Cleaning thermal head1 Slide the cover Open/Close lever and openthe Open cover.If you are using the printer inDispense mode, lifting thechange lever, slide thedispenser unit until stops(see Page 28).2 Wipe off the dirt usingcloth wetted (soaked)in alcohol.* Never use thinner,benzene, or kerosene.
