42 - English9 Use the left arrow key to back out to the mainscreenAccess Control is enabled.Walk Up OperationLogging InGeneral Users1 Enter your assigned PIN using the ten-keypad on the control panel.2 Press .The main screen appears.Administrator1 Enter “000000” using the ten-key pad on thecontrol panel, then press • The PIN of the administrator is “000000”.You cannot change this value.2 When the Admin Password screen appears,enter the administrator password: use thearrow keys to select the digits of thepassword, pressing after highlightingeach digit.3 Use the arrow keys to select [Enter] on thedisplay, then press .The main screen appears.Logging OutWhen you have finished using the machine, besure to log out.1 Press the left arrow key until the main screenappears.2 Press on the controlpanel.The screen returns to the PIN entry prompt.NoteAfter a certain period of time, the machineautomatically logs out users.Setting Up Operation From aComputer with Authenticationby PINFirst, make sure the appropriate machinedriver(s) have been installed on the computerusing the DVD.Second, install Job Accounting (client) softwareon the computer. To do this, place the DVDsupplied with the machine in the computer driveand follow the screen prompts to download theJob Accounting software from the internet.NoteThe authentication type specified on thecomputer overrides the one specified on themachine.Setting Up Windows Computers forPrintingNoteThis procedure uses MC561 and Windows 7 as anexample. The procedures and menus may differdepending on the operating system you use.1 Click [Start] > [All Programs] > [Okidata] >[Print Job Accounting Client] > [Change JobAccounting Mode].
