47 - EnglishSpecifying Current Time andSender InformationNoteYou can set up the date and time automaticallyusing the Webpage. For details, refer to theAdvanced User’s Guide at www.my.okidata.com.NoteWhen using the arrow keys, press the keyrepetitively to go to the selection.1 Press on the control panel.2 Use the down arrow key to select [EasySetup], then press .3 If prompted, entire the Admin Password, thenuse the arrow keys to highlight [Enter] andpress .4 With [Date/Time Setting] highlighted, pressthe right arrow key.5 Use the down arrow key to select theappropriate time zone and then press theright arrow key.You can select the time zone between [-12:00]and [+13:00] in 15 minute increments.6 Use the down arrow key to select [NotSummer Time] or [Now Summer Time] fordaylight saving, then press the right arrowkey.7 Use the down arrow key to select [Manual],then press the right arrow key.8 Use the up and down arrow keys to set theYear, Month and Day, pressing the right arrowkey to move to each successive block. Whendone press .9 Use the up and down arrow keys to set thecurrent time (Hour, Minute, Seconds),pressing the right arrow key to move to eachsuccessive block. When done press .“Date/Time Setting was completed” appearson the display, then the Setup Menu screenappears.Specifying Sender InformationSpecify the fax number and sender name for yourmachine. The sender ID is printed on the topedge of the fax when it is printed by the recipient.10 Press the down arrow key to select [FaxSetting], then press the right arrow key.11 Press to select [FAX number].12 Use the keypad to enter the fax number ofyour machine.13 With [Enter] highlighted, press .14 Press the right arrow to select [Sender ID].15 Use the screen keypad to enter your ID, up to22 digits. When the ID is entered, use thearrow keys to highlight [Enter], then press.“Fax Setting was completed” appears on thedisplay, then the Setup Menu screen appears.16 Press to complete the setup, then usethe left arrow key to back out to the mainscreen.
