44473001TH Rev.1 96 /Oki Data CONFIDENTIAL 4.REPLACEMENT OF PARTS4.2.7 Scanner unit(1) Remove the left side cover, the right side cover, the PU/CU PCB and the frontcover. (See 4.2.3, 4.2.4, 4.2.5 (4) and 4.2.6.)(2) Remove the cover-hinge-R, the cover-stay-L and Remove the cover-hinge-RB. (See4.2.6(2),(3),(4))(3) Open the scanner ① and remove the two E-shaped retainer rings ② and screw ③ .(4) Remove the shaft-stopper (hinge) ④ and remove the shaft-guide (hinge) ⑤ .(7) Remove the scanner ① .(8) Remove the screw ⑥ and remove the guide cable ⑦ . Remove the three screws ⑧and remove the hinge Assy FB ⑨ .(9) Remove the three screws ⑩ and remove the plate support R ⑪ . Remove the twoscrews ⑫ and remove plate support stay L ⑬ .
