120 – ScanningMC361/MC561 Basic User’s GuideSpecifying a DestinationYou can specify a destination in the following five ways:• Using the address book (see below)• Using a group list (see below)• Using the e-mail history (see page 120)• Using direct input (see page 121)• Using LDAP search (see page 121)Using the Address Book or Group ListYou can select a destination from the address book or group list. Besure to register them in advance.1 Press the down arrow key repetitively to scroll to [Address book]or [Group list], then press .2 Press the down arrow key repetitively to scroll to the destinationor group you want, then press .The check box is selected. You can select multiple entries.3 When you have selected all the destinations, press the rightarrow key.4 Make sure that [Finish Destination Selection] is selected, thenpress .5 Press the left arrow key to return to the standby screen.Using E-mail HistoryYou can select a destination from transmission histories.1 Press the down arrow key repetitively to scroll to [Tx History],then press the right arrow key.2 Press the down arrow key repetitively to scroll to a destination,then press .The check box is selected. You can select multiple entries.3 When you have selected all the destinations, press the rightarrow key.4 Make sure that [Finish Destination Selection] is selected, thenpress .5 Press the left arrow key to return to standby screen.
