19–Getting StartedMC361/MC561 Basic User’s GuideNoteThe unit comes from the factory set to enter Power Save modeafter 30 minutes of idle time.To change the interval:1.Press .2.Select [Admin Setup] > [Management] > [Power Save] >[Power Save Time].To disable (or enable) Power Saving mode:1.Press .2.Select [Admin Setup] > [User Install] > [Power Save] >[Power Save Enable].Sleep ModeWhen it is connected to a network, your machine goes from thepower saving mode into the sleep mode after a set period of time(the default is 10 minutes). In the sleep mode, the status of yourmachine is almost the same as when it is turned off.The key lights up while in the sleep mode.Important!The machine does not enter the sleep mode if an erroroccurs.Returning to the Standby ModeTo return the machine to the standby mode from the power saving orsleep modes, press the key on the control panel.NoteWhen the unit receives a print job, it automatically returns to thestandby mode.
