Set Up9EnglishTop of FormThe top of form (TOF) is automatically set when paper is loaded. Howeverand if required, the TOF can be manually adjusted as follows:1. Press the ONLINE button to turn the printer off line.2. To move the TOF up, press and hold the SHIFT button, then pressthe MICROFEED UP button until the paper is in the requiredposition.3. To move the TOF down, press and hold the SHIFT button, thenpress the MICROFEED DOWN button until the paper is in therequired position4. Press the ONLINE button.PRINTER EMULATIONYour printer can use one of three emulations - Epson FX; IBM ProprinterIII; Oki Microline. The default setting for emulation is IBM Proprinter, butthis can be changed as follows:1. Press the MENU button on the control panel and the LCD displaychanges to MENU GROUP Printer Control.Note:For further explanation of the menu system on thisprinter, refer to Menu Mode in Operation.2. Press the ITEM button, then press the OPTION button until therequired printer emulation is displayed.3. Press the STORE button to select the printer emulation.Note:When printing through Windows, the printeremulation automatically changes to Epson FX. Afterthe printing is completed, printer emulation remainsset to Epson FX.SELF TESTSTo check if your printer is working correctly, the following self tests canbe run:1. Make sure there is paper loaded into the printer.
