Oki ML5720 User Manual

Also see for ML5720: User guide

Paper handling > 21Tractors. Press the locking lever down to lock the right Pin Tractor in the desiredposition.9. Lower the top paper tray and slide it towards the front of the printer until the marksalign.10. Press the LOAD/EJECT button. The continuous forms will be taken into the printerand positioned at the first line print position and the SEL indicator will illuminate.Dismounting the rear pin tractorTo dismount:1. Ensure that the printer is turned OFF.2. Remove the top tray by holding the tray by the tabs on both sides and pulling it upfrom the printer.3. Hold the Pin Tractor by its tabs on both sides.NOTE> Raise the top paper tray if the paper does not feed properly when the reartractor is used. This will stabilise the paper movement and preventsignificant misalignment between the sheets when multi-part paper isused and also erratic line spacing.> When loading a specific type of continuous media using the Rear Feed, ifyou encounter paper jam, erratic line spacing or misalignment betweenthe sheets of the multi-part paper due to the paper crumpling at theperforations and varying binding strength, use the optional pull tractor(bottom feed) to load this type of media.