Oki ML5720 User Manual

Also see for ML5720: User guide

Paper handling > 337. Feed the paper over the roller on the stand.8. Set the paper onto the platen from the top of the tension bar.9. Rotate the platen knob until the top edge of the paper reaches the roll paper, andthen set the Paper Type Lever to PULL to easily adjust the paper position.10. Align the paper so that the exit and entry paper edges align.11. Reset the Paper Type Lever to RPS.12. Move the paper guide and adjust it to the width of the paper.13. Lower the paper separator to its original position.14. Turn the platen knob to move the paper to the point where you want printing tostart.SETTING THE PAPER THICKNESS LEVERThere are 10 lever positions for printing purposes. The 10 th position is also to facilitateribbon replacement.Set the Paper Thickness lever for different paper types as follows:CORRECT PAPER PATHa. Paper Roll b. Roll Paper Standc. Platen d. Paper GuidePAPER TYPELEVER POSITION1 2 3 4 5 6 7 8 9 10 REMARKSCut sheet paper See below52 - 81 gsm X81 - 128 gsm X128 - 156 gsm XPostcard XEnvelope XContinuous paper See below52 - 81 gsm X81 - 128 gsm Xabc d