ML620/ML621 User’s Guide Loading Cut Sheet PaperThere are two methods of loading single sheets ofcut sheet paper, top feed and front feed. See thefollowing pages for instruction.Cut Sheet Paper, Top and Front FeedMake sure the printer is turned ON.Note: If there is any continuous forms paper in theprinter, eject it as described in “RemovingContinuous Forms Paper”.Make sure that the Pin Tractor covers are closed toavoid the possibility of paper jams.Place the Paper Type lever in the cut sheet position:To load the cut sheet in the Top Feed Paper tray,raise the top tray.To load the cut sheet in the Front Feed Paper tray,open the front cover and install the front paper tray.1....Set the left margin of the paper by adjusting theappropriate Paper Guides (1) along the scale (2)relative to the start of the printed line markerarrow..2 112
