|
8 - EnglishRegulatory InformationENERGY STAR®As an ENERGY STAR Partner, Oki Data hasdetermined that this product meets theENERGY STAR guidelines for energyefficiency.Year 2000 ComplianceThis product is Year 2000 Compliant. It containsinformation technology that accurately processes date andtime data between the years 1999 and 2000, and carriesno issue for the September 9, 1999 (9999) programmingconcern. This product, when used in combination withproducts purchased from other manufacturers, whoseproducts properly exchange data and time information, willaccurately process the date and time.FCC Radio Frequency Interference StatementWARNING: This equipment has been tested and found tocomply with the limits for a Class A digital device, pursuantto Part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful interferencein a commercial environment. This equipment generates,uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, maycause harmful interference to radio communications.Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will berequired to correct the interference at their own expense.Note: It is the responsibility of the user to obtain therequired shielded cable in order to ensurecompliance of this equipment with FCC regulations.Changes or modifications not expressly approved by OkiData may void your authority to operate this device.FCC Administrative Council for TerminalAttachment Requirements for End UsersThis device has been granted a registration number by theAdministrative Council for Terminal Attachment (ACTA),under Part 68 and ACTA rules and regulations for directconnection to the telephone lines. In order to comply withthese FCC rules, the following instructions must becarefully read and applicable portions followed completely.1. This equipment complies with Part 68 of FCC rules andthe requirements adopted by the ACTA. On the back ofthe equipment is a label that contains, among otherinformation, a product identifier in the formatUS:AAAEQ##TXXXX. If requested, this inf2. The following USOC jacks may be used with thisequipment: RJ11C.3. A plug and jack used to connect this equipment to thepremises wiring and telephone network must complywith the applicable FCC Part 68 rules and requirementsadopted by the ACTA. A compliant telephone cord andmodular plug is provided with this product. It isdesigned to be connected to a compatible modular jackthat is also compliant. See installation instructions fordetails.4. The REN is used to determine the quantity of deviceswhich may be connected to the telephone line.Excessive RENs on the telephone line may result in thedevices not ringing in response to an incoming call. Inmost, but not all areas, the sum of the RENs should notexceed five (5.0). To be certain of the number ofdevices that may be connected to the line, asdetermined by the total RENs, contact the localtelephone company. For products approved after July23, 2001, the REN for this product is part of the productidentifier that has the format US:AAAEQ##TXXXX. Thedigits represented by ## are the REN without a decimalpoint (e.g., 03 is a REN of 0.3). For earlier products, theREN is separately shown on the label.5. If the equipment, MPS5500mb/MPS5500mbf, causesharm to the telephone network, the telephone companywill notify you in advance that temporarydiscontinuance of service may be required. But ifadvance notice isn’t practical, the telephone companywill notify the customer as soon as possible. Also, youwill be advised of your right to file a complaint with theFCC if you believe it is necessary.6. The telephone company may make changes in itsfacilities, equipment, operations, or procedures thatcould affect the operation of the equipment. If thishappens, the telephone company will provide advancenotice in order for you to make the necessarymodifications to maintain uninterrupted service.7. If trouble is experienced with this equipment(MPS5500mb/MPS5500mbf), please contact thefollowing for repair and/or warranty information:Oki Data Americas, Inc.2000 Bishops Gate Blvd.Mount Laurel, N.J. 08054-4620Telephone:(856) 235-2600 or(800)-OKIDATA (800-654-3282)If the equipment is causing harm to the telephonenetwork, the telephone company may request that youdisconnect the equipment until the problem is resolved.8. This equipment contains no user serviceable parts.Please contact Oki Data for service.9. This equipment cannot be used on public coin serviceprovided by the telephone company. Connection toParty Line Service is subject to state tariffs. Contactyour state Public Utility Commission, Public ServiceCommission, or Corporate Commission for information.10.If your home has specially wired alarm equipmentconnected to the telephone line, ensure the installationof this MPS5500mb/MPS5500mbf does not disable youralarm equipment. If you have questions about what willdisable alarm equipment, consult your telephonecompany or a qualified installer.FCC Telephone Consumer Protection ActThe Telephone Consumer Protection Act of 1991 makes itunlawful for any person to use a computer or otherelectronic device, including FAX machines, to send anymessage unless such message clearly contains in a marginat the top or bottom of each transmitted page or on thefirst page of the transmission, the date and time it is sentand an identification of the business or other entity, orother individual sending the message, and the telephonenumber of the sending machine or such business, otherentity, or individual. (The telehone number provided maynot be a 900 number or any other number for whichcharges exceed local or long-distance transmissioncharges.)To comply with this law, you must enter the followinginformation in your fax unit:• Date and time: see “Changing the Date and Time”under Setting Your Terminal in the User’s Guide forinstructions on doing this.
PreviousNext |