| OKIFAX 5750/5950104See “Sending a Fax to Multiple Locations, Group Faxing.”You must provide the two-digit group number(s) to the relayinitiating station.Create the Relay PasswordTo program the Relay Password1 Press Menu/Exit to enter the menu.2 Press to select Setup, press Enter.3 Press to select ID Password, press Enter.4 Enter the the 4-digit relay password, press Enter.5 Press Menu/Exit to return to standby mode.You must provide this password to the relay initiatingstation.Status of Relay Broadcast ReportYour machine [relay key station (hub)] can send aconfirmation report to the relay initiating station when therelay fax session is complete.This confirmation report is called the Relay BroadcastReport.For your machine to send the report, the telephone number ofthe relay initiating station must be programmed into AutoDial location 99 of the initiating station. The number mustbe programmed the way your machine (the hub) dialsnumbers.! Be sure to program the number in the format the relaykey station uses for dialing. For example, be sure toinclude the access digit, if required.The Relay Broadcast Report shows: the page count of the original fax the location identification of each destination machinethe relay key station (hub) communicated with during therelay fax session the page count of each fax sent to each destinationmachine the results of each destination fax sessionPrinting the Relay Fax at the HubIf you set Speed Access 27, Relay Print to ON, your machinewill print any relay fax it receives from a relay initiatingstation.
