Oki OKIOFFICE87 Setup Manual

Also see for OKIOFFICE 87: Warranty User guide Setup guide User guide

Oki OKIOFFICE87 Setup Manual Manual pdf 21 page image

Installation 212 Plug the unattached end of the power cord into a grounded ACpower outlet.3 Turn the power switch to ON.The time and current answering mode appears on the display. YourMFP machine is now in standby mode, ready to send or receivefaxes.Tip: The LCD display does not immediately disappear if the poweris turned off while idling in the Power Save mode. This is not amalfunction and the display disappears momentarily.Loading PaperYour MFP machine can hold up to 100 sheets of standard-weight (20 lb.)paper. For best results, use paper specially made for laser printers orphotocopiers. Available sizes are A4, letter size and legal size.Your MFP machine automatically reduces the vertical length of the pageimages it receives to fit on the paper loaded in your MFP machine (downto 75% of the original length). For example, if you are sent a documentcreated originally on legal-size paper, your MFP machine can reduce thereceived pages to fit on A4 or letter-size paper.Tip: Your MFP machine is set at the factory to use letter size paper. Ifyou intend to use a different paper size, change the PAPER SIZE userfunction setting to match your new paper size. See the Programmingsection in the on-line User’s Guide for instructions.1 Adjust the paper guides to the width of your paper.Tip: Adjust the paper guide on the right side to the mark of the widthof your paper. After completing paper setting (Item 3), the paperguide on the left side should be aligned to the paper’s width.