Oki OKIOFFICE87 Setup Manual

Also see for OKIOFFICE 87: Warranty User guide Setup guide User guide

Oki OKIOFFICE87 Setup Manual Manual pdf 31 page image

Installation 31d When the Install New Modem screen appears, select theappropriate device and click Next.e Check Selected ports, select the port displayed in Step 8, andclick Next.f When Digital Signature Not Found appears, click Yes.g Click Finish and when the Modems Properties dialog appears,click OK.13 When Install Complete screen appears, click OK and the setup ofthe driver is now complete.Windows Me/98/951 Make sure that both the printer and the computer are turned OFF.2 Connect the fax machine and computer with a parallel interfacecable.3 Turn the fax machine and computer ON and allow Windows to start.If you see a prompt telling you that a new device has been detected,press Cancel.4 Insert the Unimessage Pro XL CD-ROM into your CD-ROM drive.5 After the setup program has automatically started, click Setupdevice driver and Unimessage Pro and follow the on-screeninstructions as appropriate. This installs both the printer driver andthe Unimessage Pro software.Note: If you want to install only the driver, clickSetup device driver.Note: If the setup program does not automatically start orAuto insertnotification is turned off, click onStart®Run.... Type inD:\SETUP.EXE (where D is the drive letter of your CD-ROMdrive) and clickOK.6 When the Install Complete screen appears, click Finish. After thecomputer restarts, setup of the driver is complete.