Oki OKIPAGE 10e Setup Manual
Also see for OKIPAGE 10e: User manualQuick start guideManualUser manualSpare parts list
                    | |
EnglishSetup Guide 9Paper installationNote:Please refer to the user guide for the types of pa-per to use in this printer.1. Remove the paper tray from the bottom of theprinter and place plain paper in the tray, keepingthe level of the paper in the tray below the guidemarks (1).2. Adjust the rear paper support (2) to the size ofpaper you are using by lifting up and sliding for-wards or backwards as necessary.3. Adjust the paper guides (3).4. Replace the tray in the printer. The paper levelindicator (4) provides a visual indication of howmuch paper is left in the tray.Printer connectionCAUTION:Make sure the printer is disconnected from the power sup-ply and the computer is turned off.1. Connect the interface cable into the parallelsocket (1) on the printer.Note:The parallel cable should support bi-directionalcommunication and must be shielded.2. Connect the power cable into the power socket(2) on the printer, then into a grounded outlet.3. Switch the printer on using the main powerswitch (3). |
Related manuals for Oki OKIPAGE 10e
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine