Oki OKIPAGE 10ex Setup Manual

Also see for OKIPAGE 10ex: User guide Specification sheet User guide Troubleshooting manual Maintenance manual

Contents

Oki OKIPAGE 10ex Setup Manual Manual pdf 4 page image

OKIPAGE 10ex, 12i/n4Safety InstructionsYour Oki printer has been carefully designed to give you yearsof safe, reliable performance. As with all electrical equipment,however, there are a few basic precautions you should take toavoid hurting yourself or damaging the printer:• Read the setup instructions in this handbook carefully. Besure to save it for future reference.• Read and follow all warning and instruction labels on theprinter itself.• Unplug the printer before you clean it. Use only a dampcloth; do not use liquid or aerosol cleaners.• Place your printer on a firm, solid surface. If you put it onsomething unsteady, it may fall and be damaged; if youplace it on a soft surface, such as a rug, sofa, or bed, thevents may become blocked, causing the printer to overheat.• To protect your printer from overheating, make sure allopenings on the printer are not blocked. Do not put theprinter on or near a heat source, such as a radiator or heatregister. Keep it out of direct sunlight. Allow enough roomaround the printer for adequate ventilation and easy accessto the paper trays.• Do not use your printer near water, or spill liquid of anykind into it.• Be certain that your power source matches the rating listedon the back of the printer. If you are not sure, check withyour dealer or with your local power company.• Your printer has an earthed, 3-pin plug as a safety feature,and it will only fit into an earthed outlet. If you can notplug it in, chances are you have an older, non-earthed outlet;contact an electrician to have the outlet replaced. Do notuse an adapter to defeat the earthing.• To avoid damaging the power cord, do not put anything onit or place it where it will be walked on. If the cord becomesdamaged or frayed, replace it immediately.• If you are using an extension cord or power strip with theprinter, make sure that the total of the amperes required byall the equipment on the extension is less than theextension’s rating. The total ratings of all equipmentplugged into the outlet should not exceed 15 amperes.• The power outlet into which you plug your printer mustremain accessible at all times.• Lifting the top cover exposes hot surfaces. These are clearlylabelled. Do NOT touch them.• Do not insert anything into the ventilation slots on theprinter; you could get a shock or cause a fire.