41356801TH Rev.1 92 /Table 6-1 (10/10)Category LCD status message Problem or status RemedyDaily status(continued)– To clear, pressRECOVERkey when "CLEARABLEWARNINGS=ON" is being selected in the menu.– Check the host program.Normal operation.– Check the printer setting of the host.– Check the printer job data to see if there is any unsu-poorted or illegal operation in the data.NO PSPWR SAVEERROR PSAdobePSCHG DRUMEEPROMRESET'NGROM-SIMMERRORUnavailable printer language was designated by PJL com-mand (warning).The printer is in the power -saving mode.This message is displayed together with another messageon the first line.PostScript mode only.This message appears when the interpreter detects an er-ror while a job is being processed. The remainder of thejob is ignored.Informs drum life end. It can be temporarily released byopening and closing the cover or pressing the “ON LINE”switch, but basically, the drum must be replaced.Indicates an error from the result of checking EEPROM IDNo. The printer will display this for a few seconds and re-set the EEPROM to the factory default for a continuousoperation. It will occur with a new EEPROM.Reformat error including CPCMCIA header of ROM-SIMMand byte sum.It will be displayed for 2 seconds at power-on or just be-fore a shift to ON LINE.(PS Only)
