Oki OKIPAGE 16n Help Manual
Also see for OKIPAGE 16n: Read me first
                                    | |
Contents
| 
29Englishal) paperded therehe two doER SIZEthen pressply pressr:F-LINE.E CHECKD.-LINE.Printer Output GarbledIf the output of your printer appears to be corrupted, there aretwo possible causes: either the cable connection to your computeris bad, or the data generated on the computer is not correct forthe printer.Probably the easiest item to check first is your data cable. Thisshould be securely connected at both ends, and locked into placewith the connector hardware. The total cable length should ideallybe no longer than about 1.8 metres. If you use a mechanicalswitch to share the printer between multiple users, the switch isusually equivalent to about 30cm of cable.If the cable connection appears to be satisfactory and yourcomputer application software is functioning normally, tryreinstalling the printer driver software supplied with your printer.If you are still unable to resolve the problem, your Oki dealermay be able to help you.Printable AreaThe printable area is the area inside the overall dimensions ofthe page on which the machine can print. This is normally 0.64cmin from each edge for each size of paper supported. Windowsapplications will normally take this into account provided youhave installed the appropriate Oki supplied printer driver.16/09/96, 17:32 |
Related manuals for Oki OKIPAGE 16n
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine