Oki OKIPAGE 16n Help Manual

Also see for OKIPAGE 16n: Read me first

Oki OKIPAGE 16n Help Manual Manual pdf 4 page image

you yearsuipment,ld take toly. Beon thedampt it onf you placethe ventsheat.re allt the printerp it out ofprinter fortrays.• Do not use your printer near water, or spill liquid of anykind into it.• Be certain that your power source matches the rating listedon the back of the printer. If you are not sure, check withyour dealer or with your local power supplier.• Your printer has an earthed, 3-pin plug as a safety feature,and it will only fit into an earthed outlet. If you can not plugit in, you probably have an older, non-earthed outlet; contactan electrician to have the outlet replaced. Do not use anadapter to defeat the earthing.• This printer must be installed near to a power outlet switchwhich shall remain easily accessible.• To avoid damaging the power cable, do not put anything onit or place it where it will be walked on. If the cable becomesdamaged or frayed, replace it immediately.• If you are using an extension cord or power strip with theprinter, make sure that the total of the amperes required byall the equipment on the extension is less than the extension’srating. The total ratings of all equipment plugged into theoutlet should not exceed 15 amperes.16/09/96, 17:31