Page: 155Service Guide OKIPAGE 24DX/24DXnChapter C Duplex Unit Maintenance4.3.1 LCD Status Message ListThe listing of the statuses and problems displayed in the form of messages on the LCD is provided in Table 4-1.Classification LCD Status Message Description Recover MethodJam Error Informs that a jam occurs inretracting papers into thereverse roller within the duplexUnit.Remove all the papers from theinside of printer unit and Duplexunit and close the cover.Jam Error Informs that a jam occurs inretracting papers into thereverse roller within the DuplexUnit.Remove all the paper from theinside of printer unit and Duplexunit and close the cover.Jam Error Informs that a jam occurs inreversing papers in the reverseroller within the Duplex Unit.Remove all the papers from theinside of printer unit and Duplexunit and close the cover.Jam Error Informs that a jam occurs inimpinge-feeding papers withinthe Duplex Unit.Remove all the papers from theinside of printer unit and Duplexunit and close the cover.Jam Error Informs that the 1st tray is pulledout in paper-remaining statewhen feeding papers within theDuplex.Remove all papers from theinside of printer unit and Duplexunit and close the cover.Interface Timeout Informs that an I/F time-outoccurs between the printer andDuplex.- Verify connection of LEX-PCBand square-shaped connector.Replace the square-shapedconnector if necessary.- Replace LEX-PCB.Copyright 1998, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business PartnerExchange (BPX) for any updates to this material. (http://bpx.okidata.com)
