Oki OKIPAGE 4M Maintenance Manual

Also see for OKIPAGE 4M: Help guide Read me first

Contents

2 - 192.6 Paper Jam DetectionThe OKIPAGE 4w Plus/4m monitors the paper status when the power supply is on and duringprinting. In the following cases, the OKIPAGE 4w Plus/4m interrupts the printing process as apaper jam. Printing can be recovered by opening the cover, removing the jammed paper, andclosing the cover.ErrorPaper inlet jam ••Only the manual feed sensor detects "Paper exists" when the power supply is on.The leading part of the paper does not reach the paper sensor although hoppingoperation was performed three time.Cause of ErrorPaper feed jam • The leading part of the paper does not reach the outlet sensor within a fixed time after ithas passed the paper sensor.Paper outlet jam • The trailing part of the paper does not pass the outlet sensor within L mm after theleading part of the paper has passed the outlet sensor.2.52" (64 mm) L 15.77" (400.6 mm)<= <=Paper size error • The trailing part of the paper does not pass the paper sensor within L mm after theleading part of the paper has passed the paper sensor.2.52" (64 mm) L 15.77" (400.6 mm)<= <=Type of ErrorPaper feed errorPaper feed jam1Paper size errorPaper outlet jamPaper feed jam 2Supervisory SensorElectromagnetic clutch ON/Paper sensor ONPaper sensor ON/Outlet sensor ONPaper sensor ON/Paper sensor OFFOutlet sensor ON/Outlet sensor OFFPaper end sensor OFF/Outlet sensor OFFReference Value69.8122.92.52" (64 mm) L15.77" (400.56 mm)121.9Pluse Minus———45.020.03520.0—45.020.0ErrorUnit: mm<= <=2.52" (64 mm) L15.77" (400.56 mm)<= <=