User’s Guide E-113|Changing Serial Interface MenuSettingsIf you need to change any of the serial interface settings:1 Press ON LINE.The printer goes off line.2 Press and hold MENU 1/Menu 2 until you see PRINTMODE on the display.3 Press MENU 1/Menu 2 until RS232C SERIAL appears.4 Press ENTER.5 Press MENU 1/Menu 2 until the item you wish to changeappears (e.g., BAUD RATE).6 Press ©©©©©/RESET until the setting you wish to engageappears (e.g., 2400 BAUD).7 Press ENTER.An asterisk appears to indicate the new default setting(e.g., 2400 BAUD *).8 Press ON LINE.The printer saves the new setting and exits the menu.Selecting an EmulationAvailable EmulationsThe printer has the following emulations:• HP ® LaserJet ® 5 PCL5e ®• HP LaserJet 5 PCLXL• Adobe ® PostScript ® Level 2• IBM ® Proprinter ® III XL (9-pin)• Epson ® FX (9-pin)Selecting a Specific EmulationTo turn Auto Emulation Switching off, you need to enter themenu and select a specific emulation:1 Press ON LINE.The printer goes off line.2 Press MENU 1/Menu 2.The printer enters the menu mode; PERSONALITY appearson the display.3 Press ENTER/Power Save.EMULATION appears on the display.4 Press ©©©©©/Reset until the emulation you wish to selectappears on the display (e.g., HP LaserJet 5).
