E-130 |OKIPAGE 18/24DXFontsPrinting a Sample of Resident Fonts1 Place the printer off-line (press ON LINE).2 Press TRAY TYPE/Print Fonts for 2 seconds (until thedisplay reads PRINT FONTS).3 To print the typeface list for the HP emulation, pressENTER/Power Save. To print the typeface list for the IBMor Epson emulation, press ©/Reset until the emulationyou want appears on the second line of the display, thenpress ENTER/Power Save.The typeface list prints.Selecting FontsThe printer’s default font is 10 cpi Courier.The easiest way to select fonts is through your softwareprogram. Refer to your software documentation forinformation on selecting fonts.Fonts can also be selected using the printer’s control paneland main menu, however, if a different font is selected in yoursoftware, it will override the font selected in the printermenu: see the Printer Control chapter for menu information.Using Bar Code FontsThe OKIPAGE 18/24DX printer drivers support USPS PostNetbar code fonts resident on your printer. Bar Code fonts can beprinted easily from WORD for Windows and other Windowsapplications.Symbol SetsYour printer provides 90 special sets of characters fortechnical, legal and foreign language uses, as well as sets ofdrawing characters and standard alphanumeric characters.Each PCL font uses symbols from one or more of these sets.PC-8 is the printer’s default symbol set. Check your softwaredocumentation for information on how to select a symbol setand how to insert a symbol or special character into yourdocument. Symbol sets can also be selected under the FONTS& SYMBOLS category in the printer Level-1 menu.