|6 OKIPOS 426S9. Printer feeds the paper into the printer when your computer sends data.10. Preparation1) Position the printer at the front edge of the support (this promotes the unrestricted flow ofpaper into the printer), then place a stack of Sprocket (Tractor) Paper below the printer.2) The standard height of desks on which the printer is installed should be 75cm. Paper shouldbe loaded in parallel with the paper running path wherever possible. The deviation to rightand left should be 5cm or less.3) The ejected paper should be folded squarely on the floor to enable smooth paper conveyance.Inappropriate paper setting may deteriorate print quality.1 50mm or less2 750mm3 600mm or more132
