10 OKIPAGE 8w Lite• Connect the interface cable to the printer first,then connect to the computer.Parallel data connection1. Connect the interface cable to the parallel socket(1) on the printer.USB cable connectionThe printer comes with a USB interface as standard.This requires a Type A to Type B cable, not more than5m in length.1. Connect the Type B (square) connector on thecable to the USB interface connector at the rear ofthe printer (2).2. Connect the Type A (small, flat) connector on theother end of the cable to the host computer’s USBport.See ‘Printer driver installation’ for further informationon printer installation.Power connection1. Connect the power cable into the power socket(3) on the printer, then into a grounded outlet.2. Switch the printer on using the main powerswitch (4).4312