Oki RT322 User Manual

Also see for OKIPOS RT322: Software manual Setting up Quick start guide

Contents

– 23 –CCBAPaper roll coreAdjustment value according to the paper you are usingPaperThickness(μm)Horizontal (standard) Layoutø12 (A) inner diameter / ø18 (B) outer di-ameter core roll paperVertical Layout or Wall-Mountø12 (A) inner diameter / ø18 (B) outer di-ameter core roll paperDetected diameter (C)(mm)Remaining paperlength (m)Detected diameter (C)(mm)Remaining paperlength (m)Level 1 Level 2 Level 1 Level 2 Level 1 Level 2 Level 1 Level 265 Approx.ø23Approx.ø29Approx.2.5Approx.6.3Approx.ø23Approx.ø29Approx.2.5Approx.6.385 Approx.ø23Approx.ø29Approx.1.9Approx.4.8Approx.ø23Approx.ø29Approx.1.9Approx.4.8Notes:1) The adjuster is factory-set at level 1.2) The detected diameter and remained paper length givenin the table are calculated values, and there are somevariances depending on the rolled state of the paper,the actual mechanism, or the printing pattern.3) If thick paper is used (paper thickness between80 μm and 85 μm), the paper roll may loosen andcause variances in the detected values. Therefore,setting the adjuster to Level 2 is recommended.