7printer.3. SetupFor safety during maintenance and cleaning, please ensurethe battery pack and the AC adapter are removed from the3.1 Loading labels or tags1. Lift the top cover.2. Press the two print head releases down to unlock the print head module.. Unwrap the new media, and unwind a few labels from the roll. Labelsshould be wound face-in for the best results.. Slide the center justified paper guides apart until the label roll drops downbetween them.. Place media roll in the paper tray such that the media unwinds from thebottom of the roll toward the front of the printer. The label image surfacemust face up as it passes under the print head.. Move the purple paper guides in place to fix the label position.. Lift the print head and slip the free end of the media under the print headand slide it out the through the front paper exit.. Lower the printer head and press it down firmly until it locks securely onboth sides.. Close the top cover.0. Wait until the ERROR stops blinking and becomes OFF. Press the FEEDbutton to feed a label or to resume printing.345678913.2 Loading ribbon