Oki X400 User Manual

Also see for OKIPOS X400: Safety information User guide Installation Assembly instructions Install Sheet

Contents

104. Using the Printer4.1 Printing a self-test labelting a self-test label checks the printer’s overall opPrin erability. To run a self-st, confirm that the printer is loaded and connected to AC power and no print. Turn off the power.3. Turn on the power.de.normal operation only you restart the printer.tejobs are in process. Then:12. Press and hold the FEED button.4. After the printer starts printing release the FEED button.5. After the self-test label finishes printing, the printer will enter dump moTo return to normal operation, you should restart your printer.Important!The printer will be in hex dump mode after printing the self-test label. Itcannot print normal labels in hex dump mode. The printer will return to4.2 Feeding blank labelsTo feed a label, press the FEED button if no image is in the printer buffer. Toclear the printer image buffer you press and hold the FEED button for about 5seconds and release the FEED button.