5238-E P-247SECTION 9 CONTOUR GENERATION2. Contour Generation Programming Function (Side)2-1. OverviewThis function carries out arc-form machining on the periphery (side face) of a workpiece on amultiple machining model by feeding the Z-axis while rotating the C-axis.Programming is performed on the plane which is obtained by developing the cylindrical surface.Two different planes can be assumed: one is the "outer plane" as shown in Figs. 1 and 2, and theother is the "inner plane" as shown in Figs. 3 and 4.The plane used for programming, that is, the outer plane or inner plane, can be selected with theparameter indicated below:Z-CE coordinate screen of optional parameter (MULTIPLE MACHINING)• Outer plane selection (Figs. 1 and 2)• Inner plane selection (Figs. 3 and 4)(1) Outer PlaneLE33013R0301100050001(2) Inner PlaneLE33013R0301100050002C0C360Z0360G132G133CFig. 1 Fig. 2C360C0ZFig. 3 Fig. 43600 ZG132G133C
