8-164Default Setting (System Menu)Optional NetworkThis selects the settings for the optional network interface kit (IB-50) or wireless network interface kit (IB-51).NOTE: This is only displayed when a network interface kit (IB-50) or wireless network interface kit (IB-51) isinstalled as an option.Check with your network administrator when selecting the network setting. After all network related settings havebeen done, restart the network. Refer to Restart Network on page 8-170. This is mandatory to make the settingseffective!When Embedded Web Server RX is used, network parameters and security settings can be conveniently changed andchecked from your PC. For more information, refer to the Embedded Web Server RX User Guide.1 In the Sys. Menu/Count. menu, press the or key toselect [System/Network], and press the OK key.A login screen will appear. Then, enter the user ID andpassword with administrator privileges to log in, andpress [Login] (the Right Select key).2 The System/Network menu appears.3 Press the or key to select [Optional Network].4 Press the OK key. The Optional Network screenappears.TCP/IP SettingsThis selects the TCP/IP settings.The options available in the TCP/IP Settings are as follows:• TCP/IP …8-166• IPv4 Setting …8-166• IPv6 Setting …8-166Sys. Menu/Count.:a b1 Report2 Counter*********************[ Exit ]3 System/NetworkLogin User Name: L b*******************Login Password:[ Login ]System/Network: a b*********************2 I/F Block Set.3 Security Level[ Exit ]1 Network SettingOptional Network:a b1 Basic[ Exit ]
