Olivetti d-Copia 20 Operation Manual

Contents

CHAPTER 5 FUNCTIONSPress the Start key.If originals are set in the DF, all originals are scanned one byone and copying performed accordingly.If setting originals on the platen, go to the next step.Replace the original and press the Start key. Scanning of theoriginals will start. Carry out the same procedures to theoriginals of which copying will be performed, and finally,press the enter key. Copying will start.Press the Layout key to light the indicator.The layout copy setting screen will appear.Press the cursor down or up key to select the layout copymode.In the “4-UP” mode, when setting originals horizontally, select“4-UP (Z)”; when setting originals vertically, select “4-UP (N)”.Press the enter key.Press the cursor down or up key to select the type of theborderline.Select from “DOTTED” or “SOLID”.Press the enter key.The message display will return to the “READY TO COPY.”screen.Set the original(s).IMPORTANT• Before setting original on the platen, make sure they are in asequence that produces images in the numbered positions.• Select the paper according to the situation.123456785-8