Olivetti d-Copia 23 Online Manual

Also see for d-Copia 23: Operation manual

Olivetti d-Copia 23 Online Manual Manual pdf 23 page image

-21-2. Printer Drivers for Windows NT 4.02-5 Print Quality tab(For the PCL5e and PCL6 Printer Drivers)A Graphics Mode field: Displays the currently selected method ofsending graphics data from your computer to the printer. Click on thearrow (t) to display a drop-down list, and then choose from that listthe desired setting.• Vector: Sends graphics data to the printer as a mixture of HP-GL/2and raster images. If this option is selected, data will be sent to theprinter and printing will be accomplished faster than with the Rasteroption but image quality will be lowered.• Raster: Sends graphics data to the printer as raster images.* It is not possible to send graphics data only as HP-GL/2 images.If HP-GL/2 images do not print as they appear on your computerscreen when you use the Vector option, change this setting to theRaster option and try to print again.B TrueType Mode field: Click on the arrow (t) to display a drop-downlist, and then choose from that list the desired printing option in regardto fonts.• Download As Outlines: Select in order to print as quickly aspossible.• Download As Bitmaps: Select in order to print the document just asit appears on your computer screen. Printing speed will bedecreased somewhat.• Print as Graphics: Select when there are graphics or non-repetitivetext in the documents to be printed. Select this option as well whenthe document contains graphics overlaid onto text.* This option is only available when Raster is selected in theGraphics Mode field.C Use Printer TrueType Font check box: Enables selection of whetherto use the fonts installed in the printer or to have the font datadownloaded to the printer.> If this box is NOT checked, print out will be accomplished basicallyas it appears on your computer screen.> If this box IS checked, the printer will use its installed fonts and – aslong as it has the appropriate fonts – it will not download any otherfont data. This option will use less memory in the printer and this willresult in faster printing.D Page Protection field: Displays whether or not a portion of theprinter’s memory has been designated for printing documents thatcontain both text and graphics. This option enables the printer tocreate an image of the entire page in memory BEFORE paper is fedinto the printer. This ensures that the entire page will be printed andhelps prevent print overrun errors.It is normally recommended that this setting be left on Auto. On theother hand, if you experience difficulty with printing documents suchas those that contain complex graphics, it is recommended that On beselected. However, selecting On will use more memory in the printer.E Resolution field: Displays the currently selected printing resolution -600 dpi or 300 dpi. It is normally recommended that this setting be lefton 600 dpi, the highest resolution.F Toner Save field: Depending upon the setting made here, toner usecan be reduced. It is recommended that this setting be utilized whenprinting documents that contain only text. Click on the arrow (t) todisplay a drop-down list, and then choose from that list the desiredsetting: Light, Medium, Dark or Off.G EET field: Displays the currently selected setting for edgeenhancement which enables the clearest reproduction of edges andcurves when printing text and graphics. Click on the arrow (t) todisplay a drop-down list, and then choose from that list the desiredsetting: Light, Medium, Dark or Off.AEFGBCD