Olivetti d-Copia 23 Online Manual

Also see for d-Copia 23: Operation manual

Olivetti d-Copia 23 Online Manual Manual pdf 41 page image

-39-4. Macintosh PPD dialog boxes4-5 Print Options dialog box* The actual layout of each dialog box and the available options and settings may differ somewhat depending upon the application and the version ofLaserWriter that you are using.If the following settings are not available, there is a possibility that thesettings for the optional accessories that were made in the Configuredialog box are not correct. In this case, refer to “4-1 Configure dialogbox”, page 35.A Cover Page radio buttons: Enables selection of whether a cover pagewill be added before or after the documents, or not at all.B Print drop-down list: Select the desired printing mode in this drop-down list. Choose from among Black and White, Color/Grayscale,ColorSync Color Matching and PostScript Color Matching.C PostScript™ Errors drop-down list: Select in this drop-down listwhether or not to have an error report printed out, or have the contentof the error displayed on the screen, whenever a printing error occurs.D Output Destination drop-down list: When the optional Finisher orMailbox Unit is installed, select the desired printing destination in thisdrop-down list.E Toner Saving drop-down list: Toner use can be reduced. Choosefrom among Default, Off Light, Medium and Dark in this drop-downlist.F Edge Enhancement drop-down list: Select the desired setting foredge enhancement which enables the clearest reproduction of edgesand curves when printing text and graphics. Choose from amongDefault, Off Light, Medium and Dark in this drop-down list.G Staple When drop-down list: Select On in this drop-down list in orderto staple each set of printed documents in the optional Finisher.H Collate Copies drop-down list: Select On in this drop-down list inorder to Collate multiple sets of printed documents. In this case,however, the optional Hard Disk must be installed in the printer.I Shift Mode drop-down list: Select On in this drop-down list in order tohave each successive set of printed documents shifted slightly fromthe previous one when ejected.J Duplex Printing drop-down list: Select in this drop-down list whetherto have the paper turned over by its longer edge or its shorter edgeduring Duplex printing.K Paper Type drop-down list: Select in this drop-down list the desiredtype of paper for print out. Choose from among Plain, Transparencyand Other.* If the multi-bypass is selected under Paper Source in the Printerdialog box, this setting will not be available.L Resolution drop-down list: Select in this drop-down list the desiredprinting resolution. Choose either 300 dpi or 600 dpi.M OK button: Click to close the Print Options dialog box and save all ofthe currently selected settings.N Cancel button: Click to cancel the new settings.O Help button: Click to display the Help window related to the PrintOptions dialog box.P Save button: Click to save all of the currently selected settings.AMNOPBCLD ~

/ 43

Related manuals for Olivetti d-Copia 23