Olivetti d-Copia 600 Operation Manual

Also see for d-Copia 600: Service manual

Contents

Olivetti d-Copia 600 Operation Manual Manual pdf 15 page image

xiiiInstallation PrecautionsEnvironmentCautionAvoid placing the copier on or in locations which are unstable or not level. Suchlocations may cause the copier to fall down or fall over. This type of situation presentsa danger of personal injury or damage to the copier.Avoid locations with humidity or dust and dirt. If dust or dirt become attached to thepower plug, clean the plug to avoid the danger of fire or electrical shock.Avoid locations near radiators, heaters, or other heat sources, or locations nearflammable items, to avoid the danger of fire.To keep the copier cool and facilitate changing of parts and maintenance, allowaccess space as shown below. Leave adequate space, especially around the rearcover, to allow air to be properly ventilated out of the copier.Always use the caster stoppers to stabilize the copier once it is in place to keep itfrom moving and/or falling over and causing injury.Other precautionsAdverse environmental conditions may affect the safe operation and performance ofthe copier. Install in an air-conditioned room (recommended room temperature: around 73.4 °F(23 °C), humidity: around 50 %) and avoid the following locations when selecting a site for thecopier.• Avoid locations near a window or with exposure to direct sunlight.• Avoid locations with vibrations.• Avoid locations with drastic temperature fluctuations.• Avoid locations with direct exposure to hot or cold air.• Avoid poorly ventilated locations.23 5/8 "60 cm27 9/16 "70 cm39 3/8 "100 cm3 15/16 "10 cm