Olivetti d-Copia 600 Operation Manual

Also see for d-Copia 600: Service manual

Contents

Olivetti d-Copia 600 Operation Manual Manual pdf 90 page image

Troubleshooting6-4Responding to Error MessagesIf the touch panel displays any of these messages, follow the corresponding procedure.Error Messages Checkpoints Corrective Actions ReferencePageClose ### cover. Is the indicated cover open? Close all covers securely. —Check the cover. Are any covers open? Close all covers securely. —Close DocumentProcessor.Is the document processor open? Close the document processor. —Set drawer #.(Close paper cassette #.)Is one of the cassettes not fullyclosed?Pull out the cassette and push insecurely.—Reset Side Paper Deck.(Reset side feeder.)Is the optional side feeder installedcorrectly on the copier?Install the side feeder securely to thecopier.—Reset feeding unit forpaper drawer.(Reset feeding unit for pap.cassette.)Is the paper feeder securely pushedinto the copier?Pull out the paper feeder and securelypush it all the way into the copier.page 6-12Add paper in drawer #.(Add paper cassette #.)Is the indicated cassette out of paper? Load paper. If the same type of paperis loaded in another cassette in thesame orientation, you can press eitherone of paper selection keys on the leftof the touch panel to switch to thatcassette for copying.—Low on paper. Is the optional side feeder, cassette 1or cassette 2 running out of paper?Load paper in cassette 1, cassette 2or the side feeder.page 2-2page 2-6Paper capacity exceeded.Remove paper from SidePaper Deck.(Paper capacity exceeded.Remove paper from sidefeeder.)Is the maximum storage capacity ofthe optional side feeder exceeded?Remove paper from the side feederso that it becomes less than themaximum capacity.page 2-6Add paper in theMultipurpose tray.### size(Place paper on theMultipurpose tray.### size)Is paper of the specified size loaded inthe MP tray?Load paper of the size indicated in theMP tray.page 2-5Add paper in theMultipurpose tray.(Add paper on theMultipurpose tray.)Is the MP tray running out of paper? Load paper in the MP tray. page 2-5Place transparency in theMultipurpose tray.(Place transparencies onthe Multipurpose tray.)Are any transparencies loaded in theMP tray?Load transparencies in the MP tray. —Check paper size. Is the copier loaded with any paper ofa size that cannot be used under thecurrent settings?Load paper of a size that can be used. —