4731 Click the on the task bar locatedat the lower-right corner of thescreen. Click [Safely RemoveHardware].The drive letter will differ depending on thePC being used.2 When the safe to remove hardware window appears, click [OK].3 Make sure that the display is turned off, disconnect the USB.4 Connect the battery compartment to the main unit.Leave the HOLD switch in its disabled position (☞ P. 75) when connecting the batterycompartment.Connecting to Your PCDisconnecting from Your PC..................................................................................................................................................Notes• NEVER disconnect the USB while the record/play indicator light and USB access indicator light areflashing in red. If you do so, the data may be destroyed.• Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.• Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.• Use the supplied USB extension cable depending on situations.• Do not use USB extension cables other than the supplied cable. Using cables from other manufacturerscould result in damage to the recorder. Do not use the supplied USB extension cable with devices fromother manufacturers.1Connecting to Your PC
