Olympus 227735 Instruction Manual

51ENThe following AA (R6) batteries cannotbe used.Batteries whose bodies are only partially or notat all covered by an insulating sheet.Batteries whose - terminals are raised, but notcovered by an insulating sheet.Batteries whose - terminals are fl at and notcompletely covered by an insulating sheet.(Such batteries cannot be used even if the- terminals are partially covered.)If NiMH batteries are not charged within thespecifi ed time, stop charging them and do notuse them.Do not use a battery if it is cracked or broken.If a battery leaks, becomes discolored, deformedor becomes abnormal in any other way duringoperation, stop using the camera.If a battery leaks fl uid onto your clothing or skin,remove the clothing and fl ush the affected areawith clean, running cold water immediately. Ifthe fl uid burns your skin, seek medical attentionimmediately.Never subject batteries to strong shocks orcontinuous vibration.•••••Caution for Usage EnvironmentTo protect the high-precision technology containedin this product, never leave the camera in theplaces listed below, no matter if in use or storage:Places where temperatures and/or humidityare high or go through extreme changes.Direct sunlight, beaches, locked cars, or nearother heat sources (stove, radiator, etc.) orhumidifiers.In sandy or dusty environments.Near fl ammable items or explosives.In wet places, such as bathrooms or in the rain.When using products with weatherproof designs,read their manuals as well.In places prone to strong vibrations.Never drop the camera or subject it to severeshocks or vibrations.When mounted on a tripod, adjust the position ofthe camera with the tripod head. Do not twist thecamera.Do not touch electric contacts on cameras.Do not leave the camera pointed directly at thesun. This may cause lens or shutter curtaindamage, color failure, ghosting on the CCD, ormay possibly cause fires.Do not push or pull severely on the lens.Before storing the camera for a long period,remove the batteries. Select a cool, dry locationfor storage to prevent condensation or mold fromforming inside the camera. After storage, test thecamera by turning it on and pressing the shutterbutton to make sure that it is operating normally.Always observe the operating environmentrestrictions described in the camera’s manual.•••••••••••••