1305 Connecting ComputerOperational SequenceYou can transfer images from the card in the camera to your computer by connectingthe camera to the computer with the supplied USB cable.Use of the AC adapter (sold separately) is recommended when using the camerawith a computer. If you use the battery, make sure that it is fully charged. Note thatthe camera’s battery will continuously discharge (use energy) when connected(communicating) with a computer. If the battery power is exhausted, the camerawill stop operating and the computer may malfunction and the image data (files)being transferred may be lost.Never open the battery compartment/card cover, or connect or disconnect the ACadapter while the camera is connected to a computer.If the camera is connected to a computer via a USB hub, reliable operationcannot be guaranteed. If a malfunction should occur, connect the camera directlyto the computer without using the USB hub.Utilizing the images imported in a computerÎ Be sure to copy the images to the computer before editing the images usinggraphic software. Depending on the application software used, editing images(such as rotating) on the card may cause damage to the file data on the card.If the image data cannot be transferred from the card in the camera connectedusing the USB cableÎ Depending on the operating system of your computer, using an xD-Picture Cardadapter (sold separately) allows you to transfer the image data from the xD-PictureCard to your computer. For details, see OLYMPUS homepage.Installing OLYMPUS Master gP.132Connecting the camera to computer using supplied USB cable gP.138Activating OLYMPUS Master gP.140Saving pictures on computer gP.142Disconnecting the camera from your computer gP.143
