15610AppendixTroubleshootingError codesMonitor indication Possible cause Corrective actionqNO CARDThe card is not inserted,or it cannot berecognized.Insert a card, or remove the cardand insert it again correctly.If the problem persists, format thecard. If the card cannot beformatted, use a new card.qCARD ERRORThere is a problem withthe card.This card cannot be used. Insert anew card.qWRITE-PROTECTWriting to the card isprohibited.The recorded image has beenprotected (read-only) on acomputer. Download the image to acomputer and cancel the read-onlysetting.qCARD FULLThe image capacity orrecording capacity ofthe card has beenreached and no morepictures or movies canbe taken.Replace the card or erase unwantedpictures. Before erasing, downloadimportant images to a computer.qCARD FULLThe card is full. No morepictures, movies orinformation such asprint reservations canbe recorded.Replace the card or erase unwantedpictures. Before erasing, downloadimportant images to a computer.LNO PICTUREThere are no pictureson the card.The card contains no pictures.Record pictures.rPICTUREERRORThere is a problem withthe selected picture andit cannot be played backon this camera.Use image processing software toview the picture on a computer. Ifthat cannot be done, the image fileis damaged.CARD-COVEROPENThe batterycompartment/cardcover is open.Close the battery compartment/cardcover.Y/M/DWhen the camera is usedfor the first time or thebattery has beenremoved for a long time,the date and time are onthe factory default setting.Set the date and time.This card cannot beused with this cameraor the card is notformatted.Format the card.Select [POWER OFF] and press e.Insert a new card. Select [FORMAT]and press e.All data on the card is erased.CARD SETUPPOWER OFFFORMATSELECT GO OK
