2Thank you for purchasing an Olympus digital camera. Before you start to useyour new camera, please read these instructions carefully to enjoy optimumperformance and a longer service life. Keep this manual in a safe place forfuture reference.Legal and other notices•All contents of this publication are subject to change without notice.•Although the contents of this publication have been carefully checked toavoid errors, some may still occur. If you have a question about any points,or find mistakes or omissions, please contact us.•No part of this publication may be reproduced or reprinted except forpersonal use without prior written permission from Olympus.•Olympus makes no representations or warranties regarding any damages, orbenefit expected by using this unit lawfully, or any request from a thirdperson, which are caused by the inappropriate use of this product.•Olympus makes no representations or warranties regarding any damages orany benefit expected by using this unit lawfully which are caused by erasingpicture data.•Olympus reserves all rights to this manual.Radio and Television InterferenceChange or modifications not expressly approved by the manufacturer mayvoid the user’s authority to operate this equipment. This equipment has beentested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may causeharmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one ormore of the following measures:•Adjust or relocate the receiving antenna.•Increase the distance between the camera and receiver.•Connect the equipment to an outlet on a circuit different from that to whichthe receiver is connected.Only the RS-232C serial cable or USB cable should be used to connect thecamera to a personal computer (PC).
