Olympus DELTA 50 Quick Start Manual

Contents

Olympus DELTA 50 Quick Start Manual Manual pdf 23 page image

103076-01EN [U8998318], Rev. C, June 2014Important Information — Please Read Before Use 25Important Information — Please Read Before UseIntended UseThe DELTA is designed to perform identification and analysis of elementsfrom magnesium to uranium (Mg to U), depending on the selected model,contained within test samples.D O NOT USE THE DELTA FOR ANY PURPOSE OTHER THAN ITSINTENDED USE .Instruction ManualThis instruction manual contains essential information on how to use thisOlympus product safely and effectively. Before using this product, thoroughlyreview this instruction manual, and use the product as instructed.Keep this instruction manual in a safe, accessible location.S OME OF THE DETAILS OF COMPONENTS ILLUSTRATED IN THIS MANUALMAY DIFFER FROM THE COMPONENTS INSTALLED ON YOURINSTRUMENT. H OWEVER, THE OPERATING PRINCIPLES REMAIN THESAME .Instrument CompatibilityOnly use the DELTA analyzer with the following ancillary equipment:• Rechargeable lithium-ion (Li-ion) battery pack (P/N: A003 [U8990853])• Optional stand-alone external battery charger (P/N: A004 [U8990854])[varies by configuration; must select power cord]• AC adaptor (P/N: A013 [U8990860]) [varies by configuration; must selectpower cord]The DELTA is primarily a self-contained unit. However, it does have a series ofI/O ports that can be used to connect compatible peripherals and connect it to aPC. The unit derives its required DC input power from the DELTA AC adaptoror battery pack.USING INCOMPATIBLE EQUIPMENT COULD CAUSE EQUIPMENTMALFUNCTION AND /OR DAMAGE .Repair and ModificationThe DELTA does not contain any user-serviceable parts, apart from oneexception: the measurement window. If the measurement window is damaged,the window assembly should be replaced as soon as possible. For more details,refer to the DELTA User’s Manual.IN ORDER TO PREVENT HUMAN INJURY AND /OR EQUIPMENT DAMAGE ,DO NOT DISASSEMBLE , MODIFY, OR ATTEMPT TO REPAIR THEINSTRUMENT.Safety SymbolsThe following safety symbols might appear on the instrument and in theinstruction manual:General warning symbol:This symbol is used to alert the user to potential hazards. All safety messagesthat follow this symbol shall be obeyed to avoid possible harm or materialdamage.Radiation warning symbol:This symbol is used to alert the user to the presence of potentially harmfulionizing radiation generated within the XRF or XRD analyzer. All safetymessages that follow this symbol shall be obeyed to avoid possible harm.High voltage warning symbol:This symbol is used to alert the user to potential electric shock hazards greaterthan 1000 volts. All safety messages that follow this symbol shall be obeyed toavoid possible harm.Safety Signal WordsThe following safety symbols might appear in the documentation of theinstrument:The DANGER signal word indicates an imminently hazardous situation. Itcalls attention to a procedure, practice, or the like, which, if not correctlyperformed or adhered to, will result in death or serious personal injury. Do notproceed beyond a DANGER signal word until the indicated conditions are fullyunderstood and met.The WARNING signal word indicates a potentially hazardous situation. It callsattention to a procedure, practice, or the like, which, if not correctly performedor adhered to, could result in death or serious personal injury. Do not proceedbeyond a WARNING signal word until the indicated conditions are fullyunderstood and met.The CAUTION signal word indicates a potentially hazardous situation. It callsattention to an operating procedure, practice, or the like, which, if not correctlyperformed or adhered to, may result in minor or moderate personal injury,material damage, particularly to the product, destruction of part or all of theproduct, or loss of data. Do not proceed beyond a CAUTION signal word untilthe indicated conditions are fully understood and met.SafetyBefore applying power to the DELTA, verify that the correct safety precautionshave been taken (see the following warnings). In addition, take note of theexternal markings on the instrument, which are described in “SafetyInformation” on page 8.WarningsGeneral Warnings• Carefully read the instructions contained in this manual prior to turning onthe instrument.• Keep the user’s manual in a safe place for further reference.• Follow the installation and operation procedures.• It is imperative to respect the safety warnings on the instrument and in theuser’s manual.• If the equipment is used in a manner not specified by the manufacturer, theprotection provided by the equipment could be impaired.• Do not install substitute parts or perform any unauthorized modification tothe instrument.• Service instructions, when applicable, are for trained service personnel. Toavoid the risk of electric shock, do not perform any work on the instrumentunless qualified to do so. For any problem or question regarding thisapparatus, contact Olympus or an authorized Olympus representative.• Do not allow metallic or foreign objects to enter the device throughconnectors or any other openings. Otherwise, a malfunction or electricshock may result.

/ 26

Related manuals for Olympus DELTA 50