100 ENMenu functions (Custom menus)4Option Description gAF Targeting Pad If [On] is selected, the AF target can be positioned bytouching the area on the right side of the monitor duringviewfinder photography. Touch the monitor and slide yourfi nger to position the AF target.• Double-tap the monitor to turn [AF Targeting Pad] on or off.• [AF Targeting Pad ] can also be used with zoom frame AF.(P. 50)—S Button/DialOption Description gButton Function Choose the function assigned to the selected button.64[UFunction], [VFunction], [YFunction],[RFunction], [IFunction], [GFunction], [nFunction],[lFunction]Dial Function You can change the function of the front dial and rear dial. —Dial Direction Choose the direction in which the dial is rotated to adjustshutter speed or aperture. Change the program shift direction. —Mode DialFunctionYou can assign registered Myset settings to any position onthe mode dial. —T Release/jOption Description gRls Priority S If [On] is selected, the shutter can be released even whenthe camera is not in focus. This option can be set separatelyfor S-AF (P. 51) and C-AF (P. 51) modes.—Rls Priority Cj L fpsChoose the frame advance rates for [S], [T] , [k] and[l]. Figures are the approximate maximums. 57, 58j H fps♥j L fps♥j H fpsImage Stabilizer Activates image stabilization for still image shooting andmovie recording respectively. 56j ImageStabilizationActivates/deactivates image stabilization for continuousshooting. —Half Way Rls WithISWhen set to [Off], the IS (Image Stabilization) function whilethe shutter button is pressed halfway will not be activated. —Lens I.S. Priority If [On] is selected, priority is given to the lens function operationwhen using a lens with an image stabilization function. —Release Lag-Time If [Short] is selected, the time lag between fully pressing theshutter button and the shot being taken can be shortened.* —* This will shorten the battery life. Also make sure that the camera is not subject to sharpimpacts while in use. Such impacts may cause the monitor to stop displaying subjects. Ifthis happens, turn the power off and on again.MENU c SMENU c TR AF/MF MENU c R
